[AsteriskBrasil] DAHDI 2.6.X + TE410P (1st Gen ) Sem cabo sem alarmes

[Marcio Gomes]

Senhores,

Possuo um asterisk com zaptel e asterisk 1.0, estou efetuando upgrade do 
mesmo p/ dahdi+asterisk 1.8.6.XXXX + freepbx, a distro é slackware 13.37

Estou tendo um problema a nivel de modulos dahdi como segue :


/etc/init.d/dahdi start
Loading DAHDI hardware modules:
   wct4xxp:                                                 [  OK  ]
   wctdm:                                                   [  OK  ]
   wcfxo:                                                   [  OK  ]

Running dahdi_cfg:                                         [  OK  ]


  dahdi_hardware
pci:0000:00:08.0     wct4xxp+     10ee:0314 Wildcard TE410P/TE405P (1st Gen)
pci:0000:00:09.0     wctdm+       e159:0001 Wildcard TDM400P REV I




dahdi_cfg -vv

DAHDI Version: 2.6.0
Echo Canceller(s): HWEC, MG2
Configuration
======================

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 3: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 4: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 03)
Channel 04: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 04)
Channel 05: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 05)
Channel 06: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 06)
Channel 07: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 07)
Channel 08: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 08)
Channel 09: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 09)
Channel 10: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 10)
Channel 11: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 11)
Channel 12: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 12)
Channel 13: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 13)
Channel 14: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 14)
Channel 15: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 15)
Channel 16: D-channel (Default) (Echo Canceler: none) (Slaves: 16)
Channel 17: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 17)
Channel 18: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 18)
Channel 19: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 19)
Channel 20: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 20)
Channel 21: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 21)
Channel 22: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 22)
Channel 23: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 23)
Channel 24: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 24)

.
.
..
.
.

114 channels to configure.

Setting echocan for channel 1 to mg2
Setting echocan for channel 2 to mg2
Setting echocan for channel 3 to mg2
Setting echocan for channel 4 to mg2
Setting echocan for channel 5 to mg2
Setting echocan for channel 6 to mg2
Setting echocan for channel 7 to mg2
Setting echocan for channel 8 to mg2
Setting echocan for channel 9 to mg2
Setting echocan for channel 10 to mg2
Setting echocan for channel 11 to mg2
Setting echocan for channel 12 to mg2
Setting echocan for channel 13 to mg2
Setting echocan for channel 14 to mg2
Setting echocan for channel 15 to mg2
Setting echocan for channel 16 to none
Setting echocan for channel 17 to mg2
Setting echocan for channel 18 to mg2
Setting echocan for channel 19 to mg2
Setting echocan for channel 20 to mg2
Setting echocan for channel 21 to mg2
Setting echocan for channel 22 to mg2


Como podem ver abaixo, apesar de não existirem conectores nas PRI ( 
Span1 e Span2 ) e nas T1 ( Span 3 e 4 ), todas as portas
estão sem alarm "OK". Esse comportamento é totalmente contrário ao que 
acontece com Zaptel.

  dahdi_scan
[1]
active=yes
alarms=OK
description=T4XXP (PCI) Card 0 Span 1
name=TE4/0/1
manufacturer=Digium
devicetype=Wildcard TE410P/TE405P (1st Gen)
location=Board ID Switch 0
basechan=1
totchans=31
irq=0
type=digital-E1
syncsrc=1
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=AMI,HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=CCS/CRC4
[2]
active=yes
alarms=OK
description=T4XXP (PCI) Card 0 Span 2
name=TE4/0/2
manufacturer=Digium
devicetype=Wildcard TE410P/TE405P (1st Gen)
location=Board ID Switch 0
basechan=32
totchans=31
irq=0
type=digital-E1
syncsrc=1
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=AMI,HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=CCS/CRC4
[3]
active=yes
alarms=OK
description=T4XXP (PCI) Card 0 Span 3
name=TE4/0/3
manufacturer=Digium
devicetype=Wildcard TE410P/TE405P (1st Gen)
location=Board ID Switch 0
basechan=63
totchans=24
irq=0
type=digital-T1
syncsrc=1
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=B8ZS,AMI
framing_opts=ESF,D4
coding=B8ZS
framing=ESF
[4]
active=yes
alarms=OK
description=T4XXP (PCI) Card 0 Span 4
name=TE4/0/4
manufacturer=Digium
devicetype=Wildcard TE410P/TE405P (1st Gen)
location=Board ID Switch 0
basechan=87
totchans=24
irq=0
type=digital-T1
syncsrc=1
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=B8ZS,AMI
framing_opts=ESF,D4
coding=B8ZS
framing=ESF
[5]
active=yes
alarms=OK
description=Wildcard TDM400P REV I Board 5
name=WCTDM/4
manufacturer=Digium
devicetype=Wildcard TDM400P REV I
location=PCI Bus 00 Slot 10
basechan=111
totchans=4
irq=0
type=analog
port=111,FXO
port=112,FXO
port=113,FXO
port=114,FXO


[]s
Marcio