[AsteriskBrasil] DAHDI 2.6.X + TE410P (1st Gen ) Sem cabo sem alarmes

Sexta Janeiro 27 13:10:16 BRST 2012

Senhores,

Alguém já pegou as spans entrando todas como OK, mesmo quando não tem 
cabo nelas ? Alguma idéia ? Até consegui por 2 ou 3 vezes inicializa-las em
RED, mas não consigo determinar o que causa isso.

Marcio

Em 26/01/2012 15:49, Marcio Gomes escreveu:
> Senhores,
>
> Possuo um asterisk com zaptel e asterisk 1.0, estou efetuando upgrade do
> mesmo p/ dahdi+asterisk 1.8.6.XXXX + freepbx, a distro é slackware 13.37
>
> Estou tendo um problema a nivel de modulos dahdi como segue :
>
>
> /etc/init.d/dahdi start
> Loading DAHDI hardware modules:
>     wct4xxp:                                                 [  OK  ]
>     wctdm:                                                   [  OK  ]
>     wcfxo:                                                   [  OK  ]
>
> Running dahdi_cfg:                                         [  OK  ]
>
>
>    dahdi_hardware
> pci:0000:00:08.0     wct4xxp+     10ee:0314 Wildcard TE410P/TE405P (1st Gen)
> pci:0000:00:09.0     wctdm+       e159:0001 Wildcard TDM400P REV I
>
>
>
>
> dahdi_cfg -vv
>
> DAHDI Version: 2.6.0
> Echo Canceller(s): HWEC, MG2
> Configuration
> ======================
>
> SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
> SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
> SPAN 3: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
> SPAN 4: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>
> Channel map:
>
> Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01)
> Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02)
> Channel 03: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 03)
> Channel 04: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 04)
> Channel 05: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 05)
> Channel 06: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 06)
> Channel 07: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 07)
> Channel 08: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 08)
> Channel 09: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 09)
> Channel 10: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 10)
> Channel 11: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 11)
> Channel 12: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 12)
> Channel 13: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 13)
> Channel 14: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 14)
> Channel 15: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 15)
> Channel 16: D-channel (Default) (Echo Canceler: none) (Slaves: 16)
> Channel 17: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 17)
> Channel 18: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 18)
> Channel 19: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 19)
> Channel 20: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 20)
> Channel 21: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 21)
> Channel 22: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 22)
> Channel 23: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 23)
> Channel 24: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 24)
>
> .
> .
> ..
> .
> .
>
> 114 channels to configure.
>
> Setting echocan for channel 1 to mg2
> Setting echocan for channel 2 to mg2
> Setting echocan for channel 3 to mg2
> Setting echocan for channel 4 to mg2
> Setting echocan for channel 5 to mg2
> Setting echocan for channel 6 to mg2
> Setting echocan for channel 7 to mg2
> Setting echocan for channel 8 to mg2
> Setting echocan for channel 9 to mg2
> Setting echocan for channel 10 to mg2
> Setting echocan for channel 11 to mg2
> Setting echocan for channel 12 to mg2
> Setting echocan for channel 13 to mg2
> Setting echocan for channel 14 to mg2
> Setting echocan for channel 15 to mg2
> Setting echocan for channel 16 to none
> Setting echocan for channel 17 to mg2
> Setting echocan for channel 18 to mg2
> Setting echocan for channel 19 to mg2
> Setting echocan for channel 20 to mg2
> Setting echocan for channel 21 to mg2
> Setting echocan for channel 22 to mg2
>
>
> Como podem ver abaixo, apesar de não existirem conectores nas PRI (
> Span1 e Span2 ) e nas T1 ( Span 3 e 4 ), todas as portas
> estão sem alarm "OK". Esse comportamento é totalmente contrário ao que
> acontece com Zaptel.
>
>    dahdi_scan
> [1]
> active=yes
> alarms=OK
> description=T4XXP (PCI) Card 0 Span 1
> name=TE4/0/1
> manufacturer=Digium
> devicetype=Wildcard TE410P/TE405P (1st Gen)
> location=Board ID Switch 0
> basechan=1
> totchans=31
> irq=0
> type=digital-E1
> syncsrc=1
> lbo=0 db (CSU)/0-133 feet (DSX-1)
> coding_opts=AMI,HDB3
> framing_opts=CCS,CRC4
> coding=HDB3
> framing=CCS/CRC4
> [2]
> active=yes
> alarms=OK
> description=T4XXP (PCI) Card 0 Span 2
> name=TE4/0/2
> manufacturer=Digium
> devicetype=Wildcard TE410P/TE405P (1st Gen)
> location=Board ID Switch 0
> basechan=32
> totchans=31
> irq=0
> type=digital-E1
> syncsrc=1
> lbo=0 db (CSU)/0-133 feet (DSX-1)
> coding_opts=AMI,HDB3
> framing_opts=CCS,CRC4
> coding=HDB3
> framing=CCS/CRC4
> [3]
> active=yes
> alarms=OK
> description=T4XXP (PCI) Card 0 Span 3
> name=TE4/0/3
> manufacturer=Digium
> devicetype=Wildcard TE410P/TE405P (1st Gen)
> location=Board ID Switch 0
> basechan=63
> totchans=24
> irq=0
> type=digital-T1
> syncsrc=1
> lbo=0 db (CSU)/0-133 feet (DSX-1)
> coding_opts=B8ZS,AMI
> framing_opts=ESF,D4
> coding=B8ZS
> framing=ESF
> [4]
> active=yes
> alarms=OK
> description=T4XXP (PCI) Card 0 Span 4
> name=TE4/0/4
> manufacturer=Digium
> devicetype=Wildcard TE410P/TE405P (1st Gen)
> location=Board ID Switch 0
> basechan=87
> totchans=24
> irq=0
> type=digital-T1
> syncsrc=1
> lbo=0 db (CSU)/0-133 feet (DSX-1)
> coding_opts=B8ZS,AMI
> framing_opts=ESF,D4
> coding=B8ZS
> framing=ESF
> [5]
> active=yes
> alarms=OK
> description=Wildcard TDM400P REV I Board 5
> name=WCTDM/4
> manufacturer=Digium
> devicetype=Wildcard TDM400P REV I
> location=PCI Bus 00 Slot 10
> basechan=111
> totchans=4
> irq=0
> type=analog
> port=111,FXO
> port=112,FXO
> port=113,FXO
> port=114,FXO
>
>
> []s
> Marcio
>
> _______________________________________________
> KHOMP ::: External Series Experience :::
> Um novo conceito para o mercado de aplicações que vai
> fazer você pensar fora da caixa. Aguarde este lançamento
> _______________________________________________
> DIGIVOICE: Lider no mercado de placas para Asterisk
> Único fabricante com Centro de Treinamento especializado.
> LANÇAMENTO: Channel Bank TDMoE, até 64 canais FXS / FXO.
> www.digivoice.com.br ou (11)3016-5200.
> ________
> YEALINK: Telefones IP e VídeoPhones IP com o melhor custo/benefício do mercado.
> email: yealink em commlogik.com.br | www.commlogik.com.br | (11) 5503-1011
> ______________________________________________
> Para remover seu email desta lista, basta enviar um email em branco para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org