[AsteriskBrasil] DONGLE

Leonardo Sena leosud em gmail.com
Terça Junho 9 18:30:19 BRT 2015


Srs


Descobri o problema o software que eu usei para habilitar ao voice nao
estava funcionando agora consigo fazer a discagem porem o state fica
como Dialing mesmo apos a chamada sendo atendida alguem tem ideia do que
possa ser

2015-06-08 14:39 GMT-03:00 Leonardo Sena <leosud at gmail.com>:

> Adicionando informação
>
> quando tento fazer a chamada
>
> *CLI>
>   == Using SIP RTP CoS mark 5
>     -- Executing [9090985020561 at teste:1] Dial("SIP/1000-00000000",
> "dongle/g0/9090985020561") in new stack
>     -- Called dongle/g0/9090985020561
> [Jun  8 12:24:05] ERROR[6288]: at_response.c:467 at_response_error:
> [dongle0] Dial failed
>     -- Dongle/dongle0-0100000000 is circuit-busy
>   == Everyone is busy/congested at this time (1:0/1/0)
>     -- Auto fallthrough, channel 'SIP/1000-00000000' status is 'CONGESTION'
>
>
> depois da segunda tentativa
>
> >
>   == Using SIP RTP CoS mark 5
>     -- Executing [9090985020561 at teste:1] Dial("SIP/1000-00000007",
> "dongle/g0/9090985020561") in new stack
> [Jun  8 13:42:09] WARNING[19580]: channel.c:166 channel_request: [g0]
> Request to call on device which can not make call at this moment
> [Jun  8 13:42:09] WARNING[19580]: app_dial.c:2345 dial_exec_full: Unable
> to create channel of type 'dongle' (cause 44 - Requested channel not
> available)
>   == Everyone is busy/congested at this time (1:0/0/1)
>     -- Auto fallthrough, channel 'SIP/1000-00000007' status is
> 'CHANUNAVAIL'
>
>
>
>
> 2015-06-08 14:30 GMT-03:00 Leonardo Sena <leosud at gmail.com>:
>
>> Srs
>>
>>
>> Estou fazendo testes no chan_dongle com o modem E156 consigo enviar sms e
>> receber, porem chamadas não esta funcionando, nao sei bem o que acontece
>>
>> Alguem pode dar uma força a feature de voice ja esta habilitada
>>
>> gw-boss*CLI> dongle show devices
>> ID           Group State      RSSI Mode Submode Provider Name  Model
>>  Firmware          IMEI             IMSI             Number
>> dongle0      0     Dialing    10   0    0       Vivo           E156C
>>  11.608.05.00.00   35864102XXX  724101910XXX  +5511998951452
>>
>>
>> w-boss*CLI> dongle show device state dongle0
>> -------------- Status -------------
>>   Device                  : dongle0
>>   State                   : Dialing
>>   Audio                   : /dev/ttyUSB0
>>   Data                    : /dev/ttyUSB1
>>   Voice                   : Yes
>>   SMS                     : Yes
>>   Manufacturer            : huawei
>>   Model                   : E156C
>>   Firmware                : 11.608.05.00.00
>>   IMEI                    :
>>   IMSI                    :
>>   GSM Registration Status : Registered, home network
>>   RSSI                    : 10, -93 dBm
>>   Mode                    : No Service
>>   Submode                 : No service
>>   Provider Name           : Vivo
>>   Location area code      : 9DDB
>>   Cell ID                 : A50E
>>   Subscriber Number       : +5511998951452
>>   SMS Service Center      : +550101102010
>>   Use UCS-2 encoding      : Yes
>>   USSD use 7 bit encoding : No
>>   USSD use UCS-2 decoding : Yes
>>   Tasks in queue          : 0
>>   Commands in queue       : 0
>>   Call Waiting            : Disabled
>>   Current device state    : start
>>   Desired device state    : start
>>   When change state       : now
>>   Calls/Channels          : 1
>>     Active                : 0
>>     Held                  : 0
>>     Dialing               : 0
>>     Alerting              : 0
>>     Incoming              : 0
>>     Waiting               : 0
>>     Releasing             : 0
>>     Initializing          : 1
>>
>>
>> root at gw:/etc/asterisk# lsusb
>> Bus 001 Device 013: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA
>> Modem / E230/E270/E870 HSDPA/HSUPA Modem
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://asteriskbrasil.org/pipermail/asteriskbrasil/attachments/20150609/2584ecc2/attachment-0001.html>


Mais detalhes sobre a lista de discussão AsteriskBrasil