[AsteriskBrasil] ENC: ATA GrandsStream HT-503 V1.4A nao atende ligações
Estefanio Brunhara
estefanio em brunhara.com
Segunda Abril 6 17:26:37 BRT 2015
Desculpa não entendi!
Hoje esta funcionando desta forma:
A configuração de ramal esta OK, falo e recebe de qualquer ramal, consigo
disca de qualquer rama para fora, usando a linha de par metálico da OI,
porem as ligações que chegam na linha da OI, o ATA não atende
Fiz as configurações abaixo no ATA.
De: asteriskbrasil-bounces at listas.asteriskbrasil.org
[mailto:asteriskbrasil-bounces at listas.asteriskbrasil.org] Em nome de Patrick
Enviada em: segunda-feira, 6 de abril de 2015 10:56
Para: asteriskbrasil at listas.asteriskbrasil.org
Assunto: Re: [AsteriskBrasil] ATA GrandsStream HT-503 V1.4A nao atende
ligações
Ta faltando configurei em Basic Setting a extensão e o IP de destino pra
jogar pro PABX
On 06-04-2015 09:33, Estefanio Brunhara wrote:
Bom dia, lista!
Configurei meu FreePbx bem básico, estou conseguindo fazer ligações, porém
meu ATA não atende ligações originada na linha física.
Alguém poderia me dizer o que faltou?
Pergunta, mesmo se o FreePbx estivesse configurado errado (rota de entrada)
o ata teria que pelo menos atender a ligação?
#### A configuração da porta FXO
Number of Rings:1 (1-50. Default 4)
(Number of rings for a PSTN incoming call
before FXO port answers to accept VoIP number)
PSTN Ring Thru FXS: (x) No Yes (Default Yes)
(If set to yes, all incoming PSTN calls will
ring the FXS port after the Ring Thru Delay)
PSTN Ring Thru Delay (sec): 1 (1-10 seconds. Default
4 seconds)
######### A configuração completa do ATA
Account Active: No Yes
Primary SIP Server: 192.168.77.169 (e.g.,
sip.mycompany.com, or IP address)
Failover SIP Server: 192.168.77.169 (Optional, used
when primary server no response)
Prefer Primary SIP Server: No (x) Yes ( yes - will
register to Primary Server if Failover registration expires)
Outbound Proxy:
(e.g., proxy.myprovider.com, or IP address, if any)
SIP Transport: (x)UDP TCP TLS (default is UDP)
NAT Traversal: (x)No Keep-Alive STUN UPnP
SIP User ID: 1111 (the user part of an SIP address)
Authenticate ID: 1111 (can be identical to or different from SIP User
ID)
Authenticate Password: xxxx (purposely not displayed for security
protection)
Name: (optional, e.g., John Doe)
DNS Mode: (x) A Record SRV NAPTR/SRV Use Configured
IP
Primary IP:
Backup IP1:
Backup IP2:
Tel URI:
SIP Registration: No (x) Yes
Unregister On Reboot: No Yes
Outgoing Call without Registration: No (x) Yes
Register Expiration: 60
(in minutes. default 1 hour, max 45 days)
Reregister before Expiration: 0
(in seconds. Default 0 second)
SIP Registration Failure Retry Wait Time: 20 (in
seconds. Between 1-3600, default is 20)
Local SIP port: 6062 (default 5062)
Local RTP port: 5012 (1024-65535, default 5012)
Use Random Port: (x) No Yes
Remove OBP from Route Header: (x) No Yes
Support SIP Instance ID: No (x) Yes
Validate Incoming SIP Message: (x) No Yes
Check SIP User ID for incoming INVITE: (x) No Yes (no
direct IP calling if Yes)
Authenticate incoming INVITE: (x) No Yes
Allow Incoming SIP Messages
from SIP Proxy Only: (x) No Yes (no direct IP calling if Yes)
SIP T1 Timeout: 0.5
SIP T2 Interval: 4
DTMF Payload Type: 101
Preferred DTMF method:
(in listed order)
Priority 1: RFC2833
Priority 2: SIP INFO
Priority 3: In-audio
Disable DTMF Negotiation: (x) No (default, negotiate with peer) Yes
(use above DTMF order without negotiation)
Proxy-Require:
Use NAT IP: (used in
SIP/SDP message if specified)
Use SIP User-Agent Header:
Ring Timeout: 60 (10-300, default is 60 seconds)
Early Dial: (x) No Yes (use "Yes" only if proxy supports 484
response)
Dial Plan Prefix: (this prefix string is added to each
dialed number)
Use # as Dial Key: No (x) Yes (if set to Yes, "#"
will function as the "Dial" key)
Dial Plan: { x+ | *x+ | *xx*x+ }
SUBSCRIBE for MWI: (x) No, do not send SUBSCRIBE for Message Waiting
Indication
Yes, send periodical SUBSCRIBE for Message Waiting Indication
Anonymous Call Rejection: (x) No Yes
Special Feature: Standard
Session Expiration: 180 (in seconds. default 180 seconds)
Min-SE: 90 (in seconds. default
and minimum 90 seconds)
Caller Request Timer: (x) No Yes (Request for timer when making
outbound calls)
Callee Request Timer: (x)No Yes (When caller supports timer but did
not request one)
Force Timer: (x) No Yes (Use timer even when remote party does
not support)
UAC Specify Refresher: UAC UAS (x) Omit (Recommended)
UAS Specify Refresher: (x) UAC UAS (When UAC did not
specify refresher tag)
Force INVITE: (x)No Yes (Always refresh with INVITE instead of
UPDATE)
INVITE Ring-No-Answer Timeout (sec): 40 (5-300
seconds. Default 40 seconds)
Enable 100rel: (x) No Yes
Use First Matching Vocoder in 200OK SDP: (x) No Yes
Preferred Vocoder:
(in listed order)
choice 1: PCMU
choice 2: PCMA
choice 3: G723
choice 4: G729
choice 5: G726-32
choice 6: ILBC
choice 7: G729E
choice 8: AAL2-G726-16
Voice Frames per TX: 2 ( default 2, from 1 to 4 for
G711/G726/G729)
G723 Rate: (x) 6.3kbps encoding rate 5.3kbps encoding rate
iLBC Frame Size: (x) 20ms 30ms
iLBC Payload Type: 97 (between 96 and 127, default is 97)
AAL2-G726-16 Payload Type: 100 (between 96 and 127, default is
100)
AAL2-G726-24 Payload Type: 99 (between 96 and 127, default
is 99)
AAL2-G726-32 payload type: 104 (between 96 and 127, default is
104)
AAL2-G726-40 Payload Type: 103 (between 96 and 127, default is
103)
G729E Payload Type: 102 (between 96 and 127,
default is 102)
VAD: (x)No Yes
Symmetric RTP: (x)No Yes
Fax Mode: (x) T.38 (Auto Detect) Pass-Through
Fax Tone Detection Mode: Caller (x)Callee Caller or Callee
Jitter Buffer Type: Fixed (x) Adaptive
Jitter Buffer Length: Low (x) Medium High
SRTP Mode: (x) Disabled Enabled but not forced Enabled and
forced
Caller ID Scheme: Bellcore/Telcodia
FSK Caller ID Minimum RX Level (dB): -40
(-96 - 0dB. Default -40dB)
FSK Caller ID Seizure Bits:70
(0 - 800 bits. Default 70)
FSK Caller ID Mark Bits: 40
(1 - 800 bits. Default 40)
Caller ID Transport Type: Relay via SIP From
Send Hook Flash To PSTN: (x) No Yes (If Yes, hook flash
will be sent to PSTN upon receiving flash event from RFC2833 or SIP INFO)
Hook Flash Duration (ms): 600 (200 - 1500 milliseconds.
Default 600)
Gain:0 TX RX0
Disable Line Echo Canceller (LEC): (x) No Yes
FXO Termination
Enable Current Disconnect: No (x)Yes
(Default Yes. If set to yes, enter threshold below)
Current Disconnect Threshold (ms):100
(50-800 milliseconds. Default 100 milliseconds)
Enable PSTN Disconnect Tone Detection: (x) No
Yes (Default No)
(If set to yes, the following tone is used as
the disconnect signal)
PSTN Disconnect Tone: f1=425 at -32,f2=0 at -32,c=500/500
(Syntax: f1=freq at vol, f2=freq at vol,
c=on1/off1-on2/off2-on3/off3;)
(Allowed Range: freq = 0 to 4000Hz; vol = -40
to -24dBm)
(Default: Busy Tone:
f1=480 at -32,f2=620 at -32,c=500/500;)
AC Termination Model Country-based
(x) Impedance-based (Default Country-based )
Country-based USA
Impedance-based 900R 900ohms
Number of Rings:1 (1-50. Default 4)
(Number of rings for a PSTN incoming call
before FXO port answers to accept VoIP number)
PSTN Ring Thru FXS: (x) No Yes (Default Yes)
(If set to yes, all incoming PSTN calls will
ring the FXS port after the Ring Thru Delay)
PSTN Ring Thru Delay (sec): 1 (1-10 seconds. Default
4 seconds)
Channel Dialing
DTMF Digit Length (ms): 100 (40-127 milliseconds,
Default 100 milliseconds)
DTMF Dial Pause (ms): 100 (40-127 milliseconds, Default
100 milliseconds)
First Digit Timeout (sec):10 (1-20 seconds.
Default 10 seconds)
Inter-Digit Timeout (sec): 4 (1-15 seconds. Default
4 seconds)
Wait for Dial-Tone: (x) No Yes (Default
Yes - dial upon dial-tone)
Stage Method (1/2): 1 (Default 2 - 2 stage dialing)
Min Delay Before Dial PSTN Number: 500 (default
500ms, range 50 ~ 65000ms)
_______________________________________________
WORKOFFEE KHOMP: A Khomp renovou sua agenda de workshops
gratuitos em 2015. Participe da próxima edição no Rio de
Janeiro, dia 10 de abril, e conheça o lançamento UMG 100.
Garanta a sua vaga e saiba mais em: www.workoffee.com.br
_______________________________________________
DIGIVOICE: Fabricante pioneiro em Banco de Canais e Placas E1, GSM, FXO e
FXS para Asterisk e Elastix. Temos Cursos de Telefonia IP e Asterisk.
Construa soluções de PABX IP com produtos DigiVoice - visite
www.digivoice.com.br
_______________________________________________
Para remover seu email desta lista, basta enviar um email em branco para
asteriskbrasil-unsubscribe at listas.asteriskbrasil.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://asteriskbrasil.org/pipermail/asteriskbrasil/attachments/20150406/60a635b3/attachment-0001.html>
Mais detalhes sobre a lista de discussão AsteriskBrasil