[AsteriskBrasil] Pesquisa de Satisfação na URA
Sylvio Jollenbeck
sylvio.jollenbeck em gmail.com
Sexta Novembro 29 13:28:53 BRST 2013
Renata,
Muito bom!
Só uma dica, evite usar diversos Playback e Wait, você não precisa
interromper tanto assim o Asterisk, sugestão:
Playback(audio1&silence/1&audio2&silence/1);
Observe: estamos concatenando os áudios e ainda estamos reproduzindo um 1
seg. de silencio, isso resolve a sua logica de Playback seguido de Wait(1);
Agora, a melhor pratica é você colocar tudo isso dentro do comando Read,
exemplo:
Read(NOTA,audio1&silence/1&audio2&silence/1,1);
Abs,
Em 29 de novembro de 2013 12:58, Elieser Junior <zeljunior em gmail.com>escreveu:
> Parabéns Renata, muito bom.
>
>
>
> Em 29 de novembro de 2013 11:50, Renata Dias <renatchinha em gmail.com>escreveu:
>
> Link onde explica o extension h:
>> http://www.voip-info.org/wiki/view/Asterisk+h+extension
>>
>>
>> Por incrível que pareça, hoje consegui também fazer funcionar com o
>> Asterisk 1.4. Uni as dicas postadas aqui e consegui o seguinte resoltado:
>>
>> [pesquisa]
>> exten => 8,1,queue(suporte,tT)
>>
>> [principal]
>> exten => 8,1,Answer()
>> exten => 8,n,Playback(midia/PODERA_SER_GRAVADA)
>> exten => 8,n,waitexten(1)
>> exten => 8,n,Playback(midia/AGRADECEMOS_CONTATO)
>> exten => 8,n,Playback(midia/AGUARDE)
>> exten => 8,n,Dial(Local/8 em pesquisa,5,*gtT*)
>>
>> exten => 8,n,Playback(qualidade/AVALIE)
>> exten => 8,n,wait(1)
>> exten => 8,n,Playback(qualidade/SOL_ATENDIDA)
>> exten => 8,n,wait(1)
>> exten => 8,n,Playback(qualidade/CASO_SIM)
>> exten => 8,n,Playback(qualidade/CASO_NAO)
>> exten => 8,n,Read(ATENDIDA,,1)
>> exten => 8,n,wait(1)
>> exten => 8,n,Playback(qualidade/COMO_AVALIA)
>> exten => 8,n,wait(1)
>> exten => 8,n,Playback(qualidade/ZERO_NOVE)
>> exten => 8,n,Read(NOTA,,1)
>> exten => 8,n,wait(1)
>> exten => 8,n,playback(qualidade/OBRIGADA)
>> exten =>
>> 8,n,Set(ODBC_consulta()=${CALLERID(num)}\,${EXTEN}\,${ATENDIDA}\,${NOTA})
>> exten => 8,n,hangup()
>>
>>
>> Eu já havia tentado dessa forma como Dial usando a opção "g", mas não
>> estava transferindo para outro conexto...
>> Agora que fiz assim funcionou !
>>
>> Ulisses Féres, essa é a forma como fiz!
>> Ai você tem que configurar também o ODBC para conexão com o banco, e o
>> func_odbc.conf do Asterisk com a query que você quer executar.
>>
>> Obrigada a todos.
>>
>>
>>
>> Em 29 de novembro de 2013 12:07, Sylvio Jollenbeck <
>> sylvio.jollenbeck em gmail.com> escreveu:
>>
>> Elieser,
>>>
>>> A extensão 'h' significa que qdo uma das pernas da chamada for
>>> encerrada o Asterisk deverá desviar a perna permanecente para essa extensão
>>> e por essa extensão você poderá aplicar os últimos tratamentos da sua
>>> chamada que neste momento já esta morrendo.
>>>
>>> O 'h' nada mais é que o 'h'angup. O mau uso da extensão 'h' poderá
>>> trazer muitos conflitos em sua aplicação, vale lembrar que o 'h' poder
>>> servir apenas a um único contexto, um contexto por vez, então se você tiver
>>> muitos 'h' espalhados em sua app.... deve sempre pensar e lembrar que o 'h'
>>> a ser aplicado foi o primeiro a ler lido no contexto por onde sua chamada
>>> passou.
>>>
>>> Abs,
>>>
>>>
>>> Em 29 de novembro de 2013 11:55, Elieser Junior <zeljunior em gmail.com>escreveu:
>>>
>>> Sylvio, você pode explicar a função desse "h" ?
>>>>
>>>> Obrigado.
>>>>
>>>>
>>>>
>>>> Em 29 de novembro de 2013 10:27, Sylvio Jollenbeck <
>>>> sylvio.jollenbeck em gmail.com> escreveu:
>>>>
>>>> Renata,
>>>>>
>>>>> Fico super feliz que tenha funcionado. Agora para explicar o que
>>>>> ocorreu eu preciso ver o seu dialplan, somente após essa analise eu poderei
>>>>> dizer o que o Asterisk estava entendo e como ele estava processando. Parece
>>>>> besteira, mas um "h" no lugar errado é suficiente para "estragar" tudo.
>>>>>
>>>>> Abs,
>>>>>
>>>>>
>>>>> Em 28 de novembro de 2013 23:48, Renata Dias <renatchinha em gmail.com>escreveu:
>>>>>
>>>>>
>>>>>> Olá Sylvio,
>>>>>>
>>>>>> Acabei de fazer o teste e funcionou !!
>>>>>> Pelo que eu li, o extension "s" é usado quando o número discado
>>>>>> (número de destino) é desconhecido dentro do contexto.
>>>>>> Não consegui ainda entender porque no mesmo contexto ele busca pelo
>>>>>> extension "h", e quando dou o goto para outro contexto ele aceita o
>>>>>> extension "s".
>>>>>>
>>>>>> Saberia me explicar?
>>>>>>
>>>>>> PS: O MAIS IMPORTANTE É QUE FUNCIONOU !!
>>>>>>
>>>>>> Obrigada.
>>>>>>
>>>>>>
>>>>>> Em 28 de novembro de 2013 21:49, Sylvio Jollenbeck <
>>>>>> sylvio.jollenbeck em gmail.com> escreveu:
>>>>>>
>>>>>>
>>>>>>> Renata,
>>>>>>>
>>>>>>> faça um teste bem simples:
>>>>>>>
>>>>>>> cliente liga --> asterisk atende e encaminha para fila --> agente
>>>>>>> desliga.
>>>>>>>
>>>>>>> context from-pstn {
>>>>>>> _XXXX => {
>>>>>>> Answer();
>>>>>>> Queue(fila,tTc);
>>>>>>> goto pesquisa|s|1;
>>>>>>> };
>>>>>>> };
>>>>>>>
>>>>>>> context pesquisa {
>>>>>>> s => {
>>>>>>> Read(NOTA,PATH/AUDIO,1);
>>>>>>> NoOp(**** ${NOTA} *****);
>>>>>>> Hangup();
>>>>>>> }
>>>>>>>
>>>>>>> }
>>>>>>>
>>>>>>>
>>>>>>> Em 28 de novembro de 2013 21:25, Renata Dias <renatchinha em gmail.com>escreveu:
>>>>>>>
>>>>>>>
>>>>>>>> Pessoal,
>>>>>>>>
>>>>>>>> Instalei um novo servidor Asterisk agora com versão 1.8.23.1 e
>>>>>>>> estou realizando testes neste momento.
>>>>>>>> Estou encaminhando o cliente para a fila (queue) com a opção c (continue
>>>>>>>> in the dialplan if the callee hangs up) como vocês haviam indicado, porém,
>>>>>>>> quando o atendente (agente) desliga a ligação, o asterisk busca pelo
>>>>>>>> extension "h".
>>>>>>>> Até ai tudo bem, criei:
>>>>>>>>
>>>>>>>> exten => h,1,goto(provale,8,100)
>>>>>>>>
>>>>>>>> exten => 8,100,Playback(provale/qualidade/AVALIE)
>>>>>>>> exten => 8,n,wait(1)
>>>>>>>> exten => 8,n,Read(ATENDIDA,,1)
>>>>>>>> ...
>>>>>>>>
>>>>>>>> Acontece que o cliente cai no "h", é direcionado pro "8,100" mas
>>>>>>>> ali a ligação cai.
>>>>>>>> Creio eu que seja pelo seguinte motivo:
>>>>>>>>
>>>>>>>> http://www.voip-info.org/wiki/view/Asterisk+h+extension
>>>>>>>>
>>>>>>>> When the 'h' extension is running, the call legs have already been
>>>>>>>> torn down. There is no way to delay this happening, and you can't do
>>>>>>>> anything in the 'h' extension that needs to read audio from the channel
>>>>>>>> (since no audio will appear, the first time it tries to read audio it will
>>>>>>>> abort). Thus Playback<http://www.voip-info.org/wiki/view/Asterisk+cmd+Playback>()
>>>>>>>> orBackground<http://www.voip-info.org/wiki/view/Asterisk+cmd+BackGround>(),
>>>>>>>> for example, does not work. Essentially, the only things that make sense to
>>>>>>>> use in the 'h' extension are those that don't have anything to do with the
>>>>>>>> external channel that was involved before the hangup. No audio, no DTMF,
>>>>>>>> etc.
>>>>>>>>
>>>>>>>> Alguma solução??
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> Em 26 de novembro de 2013 12:40, Patrick El Youssef <
>>>>>>>> wushumasters em gmail.com> escreveu:
>>>>>>>>
>>>>>>>> Se quiser coloca o áudio dentro do Read
>>>>>>>>>
>>>>>>>>> exten => 4,n,Read(ATENDIDA,qualidade/AVALIE,1)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Em 26-11-2013 12:35, Renata Dias escreveu:
>>>>>>>>>
>>>>>>>>> Sylvio,
>>>>>>>>>
>>>>>>>>> Fiz conforme sua sugestão, ficou assim:
>>>>>>>>>
>>>>>>>>> [queue]
>>>>>>>>> exten => 8,1,answer()
>>>>>>>>> exten => 8,2,queue(suporte,tT)
>>>>>>>>>
>>>>>>>>> [ura-principal]
>>>>>>>>> exten => 4,1,Answer()
>>>>>>>>> exten => 4,n,Dial(Local/8 em queue,10,tTg)
>>>>>>>>>
>>>>>>>>> exten => 4,100,Playback(qualidade/AVALIE)
>>>>>>>>> exten => 4,n,Read(ATENDIDA,,1)
>>>>>>>>> exten => 4,n,Set(ODBC_ ... //Grava no banco o que preciso
>>>>>>>>> exten => 4,n,hangup()
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Quando escolho a opção 4 na URA principal, sou direcionada para
>>>>>>>>> o contexto queue e caio na fica suporte corretamente. Porém, quando o
>>>>>>>>> agente desliga, minha ligação também cai.
>>>>>>>>> Imagino que seja porque o queue (mesmo em um contexto diferente)
>>>>>>>>> encerra a chamada para ambas as partes, já que não consigo utilizar a opção
>>>>>>>>> c (continuação).
>>>>>>>>>
>>>>>>>>> Eu também testei da seguinte forma:
>>>>>>>>>
>>>>>>>>> [queue]
>>>>>>>>> exten => 8,1,answer()
>>>>>>>>> exten => 8,2,queue(suporte,tT)
>>>>>>>>>
>>>>>>>>> exten => 8,100,Playback(qualidade/AVALIE)
>>>>>>>>> exten => 8,n,Read(ATENDIDA,,1)
>>>>>>>>> exten => 8,n,Set(ODBC_ ... //Grava no banco o que preciso
>>>>>>>>> exten => 8,n,hangup()
>>>>>>>>>
>>>>>>>>> [ura-principal]
>>>>>>>>> exten => 4,1,Answer()
>>>>>>>>> exten => 4,n,Dial(Local/8 em queue,10,tTg)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Você utiliza essa configuração e ela funciona?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Obrigada.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Em 26 de novembro de 2013 12:34, Renata Dias <
>>>>>>>>> renatchinha em gmail.com> escreveu:
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Sylvio,
>>>>>>>>>>
>>>>>>>>>> Fiz conforme sua sugestão, ficou assim:
>>>>>>>>>>
>>>>>>>>>> [queue]
>>>>>>>>>> exten => 8,1,answer()
>>>>>>>>>> exten => 8,2,queue(suporte,tT)
>>>>>>>>>>
>>>>>>>>>> [ura-principal]
>>>>>>>>>> exten => 4,1,Answer()
>>>>>>>>>> exten => 8,n,Dial(Local/8 em queue,10,tTg)
>>>>>>>>>>
>>>>>>>>>> exten => 8,100,Playback(qualidade/AVALIE)
>>>>>>>>>> exten => 8,n,Read(ATENDIDA,,1)
>>>>>>>>>> exten => 8,n,Set(ODBC_ ... //Grava no banco o que preciso
>>>>>>>>>> exten => 8,n,hangup()
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Quando escolho a opção 4 na URA principal, sou direcionada para
>>>>>>>>>> o contexto queue e caio na fica suporte corretamente. Porém, quando o
>>>>>>>>>> agente desliga, minha ligação também cai.
>>>>>>>>>> Imagino que seja porque o queue (mesmo em um contexto diferente)
>>>>>>>>>> encerra a chamada para ambas as partes, já que não consigo utilizar a opção
>>>>>>>>>> c (continuação).
>>>>>>>>>>
>>>>>>>>>> Você consegue fazer funcionar dessa forma?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Obrigada.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Em 26 de novembro de 2013 10:50, Sylvio Jollenbeck <
>>>>>>>>>> sylvio.jollenbeck em gmail.com> escreveu:
>>>>>>>>>>
>>>>>>>>>> Cuidado, no hangup as variaveis morrem.
>>>>>>>>>>> Em 26/11/2013 10:44, "Alex Sander" <sanderdabio em globo.com>
>>>>>>>>>>> escreveu:
>>>>>>>>>>>
>>>>>>>>>>> Renata, pensei em algo assim, supondo que a ultima
>>>>>>>>>>>> aplicação seja queue, quando houver um hangup a chamada não será desligada,
>>>>>>>>>>>> logo as variáveis de canais permaneceriam.
>>>>>>>>>>>>
>>>>>>>>>>>> ...
>>>>>>>>>>>> same = n,Set(TESTE = ${CDR(lastapp)})
>>>>>>>>>>>> same = n,GotoIf($["${TESTE}" = "queue"]?URASATISFACAO)
>>>>>>>>>>>> ...
>>>>>>>>>>>>
>>>>>>>>>>>> Nada impede de testar outras variáveis.
>>>>>>>>>>>>
>>>>>>>>>>>> Mas nunca fiz isso apenas divaguei com base na dica do colega.
>>>>>>>>>>>>
>>>>>>>>>>>> Att,
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Em 26 de novembro de 2013 09:27, Renata Dias <
>>>>>>>>>>>> renatchinha em gmail.com> escreveu:
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Alex Sander, Não entendi sua dica. Poderia me explicar, por
>>>>>>>>>>>>> gentileza? Obrigada !
>>>>>>>>>>>>>
>>>>>>>>>>>>> Sylvio, eu testei com o Dial e de fato funciona. Ocorre que
>>>>>>>>>>>>> aqui na minha URA eu encaminho o cliente para os atendentes através da
>>>>>>>>>>>>> queue. Com o 1.4 não há uma forma de fazer via queue. ?
>>>>>>>>>>>>>
>>>>>>>>>>>>> Obrigada !
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Em 25 de novembro de 2013 17:17, Sylvio Jollenbeck <
>>>>>>>>>>>>> sylvio.jollenbeck em gmail.com> escreveu:
>>>>>>>>>>>>>
>>>>>>>>>>>>> Renata
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> No asterisk 1.4 voce faz via Dial usando o parâmetro "g"
>>>>>>>>>>>>>> (http://www.voip-info.org/wiki/view/Asterisk+cmd+Dial);
>>>>>>>>>>>>>> Dial(Local/Sua_Fila em contexto,5,Ttg);
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Abs
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Em 25 de novembro de 2013 17:06, jefaokpta <
>>>>>>>>>>>>>> jefaokpta em hotmail.com> escreveu:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Tendi, pq vc não poe uma linha chamando a macro-ura por ex,
>>>>>>>>>>>>>>> logo abaixo do Dial q conectou os 2 :
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Acho q não precisará, mas na falha pode usar a flag 'g' do
>>>>>>>>>>>>>>> Dial:
>>>>>>>>>>>>>>> g Proceeds in the context when the target channel has been
>>>>>>>>>>>>>>> hung up.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Vc pode mandar por param a sua macro informações do tipo:
>>>>>>>>>>>>>>> ${DIALSTATUS} caso não seja answer vc não executa a ura
>>>>>>>>>>>>>>> ${CDR(lastapp)} esse cara vai conter o ramal q o Dial
>>>>>>>>>>>>>>> discou, com base nisso vc executa ou não a URA.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Espero ter ajudado.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Flws
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Em 25-11-2013 16:30, Renata Dias escreveu:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Ola Jefaokpta,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Eu estive lendo sobre a extensão h, porém no site oficial
>>>>>>>>>>>>>>> diz:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> When the 'h' extension is running, the call legs have
>>>>>>>>>>>>>>> already been torn down. There is no way to delay this happening, and you
>>>>>>>>>>>>>>> can't do anything in the 'h' extension that needs to read audio from the
>>>>>>>>>>>>>>> channel (since no audio will appear, the first time it tries to read audio
>>>>>>>>>>>>>>> it will abort). Thus Playback<http://www.voip-info.org/wiki/view/Asterisk+cmd+Playback>()
>>>>>>>>>>>>>>> orBackground<http://www.voip-info.org/wiki/view/Asterisk+cmd+BackGround>(),
>>>>>>>>>>>>>>> for example, does not work. Essentially, the only things that make sense to
>>>>>>>>>>>>>>> use in the 'h' extension are those that don't have anything to do with the
>>>>>>>>>>>>>>> external channel that was involved before the hangup. No audio, no DTMF,
>>>>>>>>>>>>>>> etc.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Além disso, em minha URA eu tenho outras opções de
>>>>>>>>>>>>>>> atendimento, das quais eu não gostaria que todo Hangup() passasse pela
>>>>>>>>>>>>>>> pesquisa de satisfação.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> O parâmetro "c - continue in the dialplan if the callee
>>>>>>>>>>>>>>> hangs up" me pareceu o que se ajusta perfeitamente à minha necessidade,
>>>>>>>>>>>>>>> porém meu Asterisk é 1.4.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Em 25 de novembro de 2013 16:19, jefaokpta <
>>>>>>>>>>>>>>> jefaokpta em hotmail.com> escreveu:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Vc pode colocar sua ura no exten h do contexto, assim qnd
>>>>>>>>>>>>>>>> o atendente desligar a ligação irá p o contexto h.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Flws
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Em 25-11-2013 16:08, Renata Dias escreveu:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Alguma dica para Asterisk 1.4.28 ?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Em 25 de novembro de 2013 13:46, Rogger Faioli <
>>>>>>>>>>>>>>>> rogger.faioli em gmail.com> escreveu:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Ranata,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> c — continue in the dialplan if the callee hangs up (*Asterisk
>>>>>>>>>>>>>>>>> 1.6.0 and above*)
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> ou oriente aos atendentes que transfiram a ligação para
>>>>>>>>>>>>>>>>> uma URA de pós atendimento. A primeira opção é melhor!
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Em 25 de novembro de 2013 13:09, Renata Dias <
>>>>>>>>>>>>>>>>> renatchinha em gmail.com> escreveu:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Boa tarde,
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Estou implantando uma pesquisa de satisfação na minha
>>>>>>>>>>>>>>>>>> URA em Asterisk.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Gostaria de fazer com que, após o atendente desligar a
>>>>>>>>>>>>>>>>>> ligação, o cliente fosse direcionado para uma segunda URA com a pesquisa de
>>>>>>>>>>>>>>>>>> satisfação.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Pelos testes que realizei, quando o atendente (ramal
>>>>>>>>>>>>>>>>>> SIP) desliga a ligação, o cliente (channel ZAP) também é desligado.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Existe a possibilidade de manter o cliente (channerl
>>>>>>>>>>>>>>>>>> ZAP) conectado e transferi-lo para a segunda URA?
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Obrigada.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>> Renata Dias
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e
>>>>>>>>>>>>>>>>>> E1;
>>>>>>>>>>>>>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>>>>>>>>>>>>>> Intercomunicadores para acesso remoto via rede IP.
>>>>>>>>>>>>>>>>>> Conheça em www.Khomp.com.
>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2,
>>>>>>>>>>>>>>>>>> ISDN e SS7.
>>>>>>>>>>>>>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>>>>>>>>>>>>>> Channel Bank – Appliance Asterisk - Acesse
>>>>>>>>>>>>>>>>>> www.aligera.com.br.
>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>> Para remover seu email desta lista, basta enviar um email
>>>>>>>>>>>>>>>>>> em branco para
>>>>>>>>>>>>>>>>>> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e
>>>>>>>>>>>>>>>>> E1;
>>>>>>>>>>>>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>>>>>>>>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça
>>>>>>>>>>>>>>>>> em www.Khomp.com.
>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2,
>>>>>>>>>>>>>>>>> ISDN e SS7.
>>>>>>>>>>>>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>>>>>>>>>>>>> Channel Bank – Appliance Asterisk - Acesse
>>>>>>>>>>>>>>>>> www.aligera.com.br.
>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>> Para remover seu email desta lista, basta enviar um email
>>>>>>>>>>>>>>>>> em branco para
>>>>>>>>>>>>>>>>> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>> Renata Dias
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>>>>>>>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>>>>>>>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em www.Khomp.com.
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>>>>>>>>>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>>>>>>>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> Para remover seu email desta lista, basta enviar um email em branco para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>>>>>>>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>>>>>>>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça
>>>>>>>>>>>>>>>> em www.Khomp.com.
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2,
>>>>>>>>>>>>>>>> ISDN e SS7.
>>>>>>>>>>>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>>>>>>>>>>>> Channel Bank – Appliance Asterisk - Acesse
>>>>>>>>>>>>>>>> www.aligera.com.br.
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> Para remover seu email desta lista, basta enviar um email
>>>>>>>>>>>>>>>> em branco para
>>>>>>>>>>>>>>>> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Renata Dias
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>>>>>>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>>>>>>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em www.Khomp.com.
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>>>>>>>>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>>>>>>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> Para remover seu email desta lista, basta enviar um email em branco para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>>>>>>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>>>>>>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça
>>>>>>>>>>>>>>> em www.Khomp.com.
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2,
>>>>>>>>>>>>>>> ISDN e SS7.
>>>>>>>>>>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>>>>>>>>>>> Channel Bank – Appliance Asterisk - Acesse
>>>>>>>>>>>>>>> www.aligera.com.br.
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> Para remover seu email desta lista, basta enviar um email em
>>>>>>>>>>>>>>> branco para
>>>>>>>>>>>>>>> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> Sylvio Jollenbeck
>>>>>>>>>>>>>> www.hosannatecnologia.com.br
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>>>>>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>>>>>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>>>>>>>>>>> www.Khomp.com.
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2,
>>>>>>>>>>>>>> ISDN e SS7.
>>>>>>>>>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>>>>>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br
>>>>>>>>>>>>>> .
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> Para remover seu email desta lista, basta enviar um email em
>>>>>>>>>>>>>> branco para
>>>>>>>>>>>>>> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> Renata Dias
>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>>>>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>>>>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>>>>>>>>>> www.Khomp.com.
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN
>>>>>>>>>>>>> e SS7.
>>>>>>>>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>>>>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> Para remover seu email desta lista, basta enviar um email em
>>>>>>>>>>>>> branco para
>>>>>>>>>>>>> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>>>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>>>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>>>>>>>>> www.Khomp.com.
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN
>>>>>>>>>>>> e SS7.
>>>>>>>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>>>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> Para remover seu email desta lista, basta enviar um email em
>>>>>>>>>>>> branco para
>>>>>>>>>>>> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>>>>>>>> www.Khomp.com.
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e
>>>>>>>>>>> SS7.
>>>>>>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> Para remover seu email desta lista, basta enviar um email em
>>>>>>>>>>> branco para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Renata Dias
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Renata Dias
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em www.Khomp.com.
>>>>>>>>> _______________________________________________
>>>>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>>>>>> _______________________________________________
>>>>>>>>> Para remover seu email desta lista, basta enviar um email em branco para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>>>>>> www.Khomp.com.
>>>>>>>>> _______________________________________________
>>>>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e
>>>>>>>>> SS7.
>>>>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>>>>>> _______________________________________________
>>>>>>>>> Para remover seu email desta lista, basta enviar um email em
>>>>>>>>> branco para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Renata Dias
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>>>>> www.Khomp.com.
>>>>>>>> _______________________________________________
>>>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e
>>>>>>>> SS7.
>>>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>>>>> _______________________________________________
>>>>>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>>>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Sylvio Jollenbeck
>>>>>>> www.hosannatecnologia.com.br
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>>>> www.Khomp.com.
>>>>>>> _______________________________________________
>>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>>>> _______________________________________________
>>>>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Renata Dias
>>>>>>
>>>>>> _______________________________________________
>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>>> www.Khomp.com.
>>>>>> _______________________________________________
>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>>> _______________________________________________
>>>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Sylvio Jollenbeck
>>>>> www.hosannatecnologia.com.br
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>> www.Khomp.com.
>>>>> _______________________________________________
>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>> _______________________________________________
>>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>> www.Khomp.com.
>>>> _______________________________________________
>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>> _______________________________________________
>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>
>>>
>>>
>>>
>>> --
>>> Sylvio Jollenbeck
>>> www.hosannatecnologia.com.br
>>>
>>>
>>> _______________________________________________
>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>> www.Khomp.com.
>>> _______________________________________________
>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>> _______________________________________________
>>> Para remover seu email desta lista, basta enviar um email em branco para
>>> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>
>>
>>
>>
>> --
>> Renata Dias
>>
>> _______________________________________________
>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>> www.Khomp.com.
>> _______________________________________________
>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>> _______________________________________________
>> Para remover seu email desta lista, basta enviar um email em branco para
>> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>
>
>
> _______________________________________________
> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
> Intercomunicadores para acesso remoto via rede IP. Conheça em
> www.Khomp.com.
> _______________________________________________
> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
> _______________________________________________
> Para remover seu email desta lista, basta enviar um email em branco para
> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>
--
Sylvio Jollenbeck
www.hosannatecnologia.com.br
-------------- Próxima Parte ----------
Um anexo em HTML foi limpo...
URL: http://listas.asteriskbrasil.org/pipermail/asteriskbrasil/attachments/20131129/c63b5405/attachment-0001.htm
Mais detalhes sobre a lista de discussão AsteriskBrasil