[AsteriskBrasil] Tiger3XX interface + Dahdi

[Daniel Cardoso Alves]

Olá pessoal!


Estou tentando instalar uma placa Tiger Jet Network Inc, com 2 módulos FXO.

Instalei o dahdi (dahdi-linux-complete-2.4.1.2+2.4.1) e o asterisk (1.4.41) tudo normal. Porém a placa não está funcionado.
O chan_dahdi é carregado no asterisk, a placa é reconhecida pelo linux (slackware 13), mas não é criado o /proc/dahdi/DISPOSITIVOS.



lspci:
02:02.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
        Subsystem: Device b1d9:0001
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
        Latency: 0 (250ns min, 32000ns max)
        Interrupt: pin A routed to IRQ 18
        Region 0: I/O ports at <unassigned> [disabled]
        Region 1: Memory at fe630000 (32-bit, non-prefetchable) [size=64K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA PME(D0+,D1-,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
        Kernel modules: wctdm, hisax, netjet


ls -lha /proc/dahdi/
total 0
dr-xr-xr-x   2 root root 0 2012-01-20 09:21 ./
dr-xr-xr-x 172 root root 0 2012-01-20 06:35 ../


ls -lha /dev/dahdi/ 
total 0
drwxr-xr-x  2 root root      140 2012-01-20 09:08 ./
drwxr-xr-x 13 root root     4,7K 2012-01-20 09:08 ../
crw-rw----  1 root root 196, 254 2012-01-20 09:08 channel
crw-rw----  1 root root 196,   0 2012-01-20 09:08 ctl
crw-rw----  1 root root 196, 255 2012-01-20 09:08 pseudo
crw-rw----  1 root root 196, 253 2012-01-20 09:08 timer
crw-rw----  1 root root 196, 250 2012-01-20 09:08 transcode



dahdi_cfg -vvv
DAHDI Tools Version - 2.6.0

DAHDI Version: 2.4.1.2
Echo Canceller(s): 
Configuration
======================


Channel map:


0 channels to configure.





/etc/init.d/dahdi start
Loading DAHDI hardware modules:
  wct4xxp:                                                 [  OK  ]
  wcte12xp:                                                [  OK  ]
  wct1xxp:                                                 [  OK  ]
  wcte11xp:                                                [  OK  ]
  wctdm24xxp:                                              [  OK  ]
  wcfxo:                                                   [  OK  ]
  wctdm:                                                   [  OK  ]
  wcb4xxp:                                                 [  OK  ]
  wctc4xxp:                                                [  OK  ]
  xpp_usb:                                                 [  OK  ]

No hardware timing source found in /proc/dahdi, loading dahdi_dummy
Running dahdi_cfg:                                         [  OK  ]





dahdi show status (ASTERISK)
Description                              Alarms     IRQ        bpviol     CRC4


Li alguns materiais, como http://wiki.openvox.cn/index.php/OpenVox_A400P_User_Manual_for_dahdi, mas não consegui resolver.

Alguém pode me ajudar?

Obrigado!
-------------- Próxima Parte ----------
Um anexo em HTML foi limpo...
URL: http://listas.asteriskbrasil.org/pipermail/asteriskbrasil/attachments/20120119/56fe636b/attachment-0001.htm