[AsteriskBrasil] DDR com ura

[Paulo]

Bom Dia

Gente, estou utilizando o Asterix em home 2.2, e hoje já tenho uma E1 30 canais
funcionando com DDR, porem para isso funcionar fiz a seguinte modificação:
Coloquei um contexto from-pstn

[from-pstn]
include => from-pstn-custom                     
include => ext-local---------------------este e o contexto
include => ext-did 
include => from-pstn-timecheck          
exten => fax,1,Goto(ext-fax,in_fax,1)

que e.....


[ext-local]
include => ext-local-custom
exten => ,hint,
exten => 1000,1,Macro(exten-vm,1000,1000)
exten => ${VM_PREFIX}1000,1,Macro(vm,1000)
exten => 1000,hint,SIP/1000
exten => 1001,1,Macro(exten-vm,1001,1001)
exten => ${VM_PREFIX}1001,1,Macro(vm,1001)
exten => 1001,hint,SIP/1001
exten => 1002,1,Macro(exten-vm,1002,1002)
exten => ${VM_PREFIX}1002,1,Macro(vm,1002)
exten => 1002,hint,SIP/1002
exten => 1003,1,Macro(exten-vm,1003,1003)
exten => ${VM_PREFIX}1003,1,Macro(vm,1003)
exten => 1003,hint,SIP/1003
exten => 1004,1,Macro(exten-vm,1004,1004)
exten => ${VM_PREFIX}1004,1,Macro(vm,1004)
exten => 1004,hint,SIP/1004
exten => 1005,1,Macro(exten-vm,1005,1005)
exten => ${VM_PREFIX}1005,1,Macro(vm,1005)
exten => 1005,hint,SIP/1005
exten => 1010,1,Macro(exten-vm,1010,1010)
exten => ${VM_PREFIX}1010,1,Macro(vm,1010)
exten => 1010,hint,SIP/1010
exten => 1011,1,Macro(exten-vm,1011,1011)
exten => ${VM_PREFIX}1011,1,Macro(vm,1011)
exten => 1011,hint,SIP/1011
exten => 1030,1,Macro(exten-vm,1030,1030)
exten => ${VM_PREFIX}1030,1,Macro(vm,1030)
exten => 1030,hint,SIP/1030
exten => 1057,1,Macro(exten-vm,1057,1057)
exten => ${VM_PREFIX}1057,1,Macro(vm,1057)
exten => 1057,hint,SIP/1057
exten => 1058,1,Macro(exten-vm,1058,1058)
exten => ${VM_PREFIX}1058,1,Macro(vm,1058)
exten => 1058,hint,SIP/1058
exten => 1059,1,Macro(exten-vm,1059,1059)
exten => ${VM_PREFIX}1059,1,Macro(vm,1059)
exten => 1059,hint,SIP/1059
exten => 1060,1,Macro(exten-vm,1060,1060)
exten => ${VM_PREFIX}1060,1,Macro(vm,1060)
exten => 1060,hint,SIP/1060


Porem, nenhuma configuração a mais que eu coloque via AMP, não funciona. Não
funciona a URA, não funciona mais nada, so o DDR.

Alguém sabe como eu colocar pra funcionar a URA mais a DDR?

Desde já agradeço a atenção

Paulo